Command Manual - QoS/ACL
Quidway S6500 Series Ethernet Switches Chapter 2 Qos Command
Huawei Technologies Proprietary
2-15
Description
Using the display qos-interface traffic-statistic command, you can view the traffic
statistics information. The displayed content includes the corresponding ACLs of the
traffics to be calculated, the number of calculated packets, etc.
For the related configuration, see traffic-statistic.
Example
# Display the traffic statistics information.
<Quidway> display qos-interface gigabitEthernet5/0/1 traffic-statistic
GigabitEthernet5/0/1:traffic-statistic
Inbound:
Matches: acl std1 rule 0 running
0 byte
0 packet
Outbound:
Matches: acl std1 rule 1 running
0 byte
0 packet
Table 2-8 Field explanation of this command
Field Explanation
GigabitEthernet5/0/1:traffic-sta
tistic
Inbound:
Matches: acl std1 rule 0
running
0 byte
0 packet
Outbound:
Matches: acl std1 rule 1
running
0 byte
0 packet
Information of traffic statistics:
“ Matches: acl std1 rule 0 running 0 byte 0
packet” means that the number of the packets that
match with the subrule 0 of ACL std1 is 0.
“ Matches: acl std1 rule 1 running 0 byte 0
packet” means that the number of the packets that
match with the subrule 1 of ACL std1 is 0.
To Next Page
Loading...
