Huawei Quidway S6500 Series Command Manual

Command Manual - Multicast Protocol
Quidway S6500 Series Ethernet Switches Chapter 4 IGMP Configuration Commands
Huawei Technologies Proprietary
4-3
4.1.3 display igmp interface
Syntax
display igmp interface [ interface-type interface-number ]
View
Any view
Parameter
interface-type interface-number: Interface type and interface number of the router,
used to specify the interface. If the parameters are omitted, information about all the
interfaces running IGMP will be displayed.
Description
Using display igmp interface command, you can view the IGMP configuration and
running information on an interface.
Example
# View the IGMP configuration and running information of all interfaces.
<Quidway> display igmp interface
Vlan-interface1 (10.153.17.99):
IGMP is enabled
Current IGMP version is 2
Value of query interval for IGMP(in seconds): 60
Value of other querier time out for IGMP(in seconds): 120
Value of maximum query response time for IGMP(in seconds): 10
Value of robust count for IGMP: 2
Value of startup query interval for IGMP(in seconds): 15
Value of last member query interval for IGMP(in seconds): 1
Value of query timeout for IGMP version 1(in seconds): 400
Policy to accept IGMP reports: none
Querier for IGMP: 10.153.17.99 (this router)
IGMP group limit is 1024
No IGMP group reported
4.1.4 igmp enable
Syntax
igmp enable
igmp disable

Huawei Quidway S6500 Series Specifications

General

Brand	Huawei
Model	Quidway S6500 Series
Category	Network Router
Language	English