Huawei Quidway S6500 Series Command Manual

Command Manual - Routing Protocol
Quidway S6500 Series Ethernet Switches Chapter 5 BGP Configuration Commands
Huawei Technologies Proprietary
5-47
Three types of routes may be involved in BGP: routes learned from external peers,
routes learned from internal peers and local-origined routes. You can set preference
values for the three types of route.
You can set different BGP preference values for different sub address families.
Currently the system supports unicast and multicast address families.
Example
# Set the preferences of EBGP, IBGP and locally generated routes to 170.
[Quidway-bgp] preference 170 170 170
5.1.57 reflect between-clients
Syntax
reflect between-clients
undo reflect between-clients
View
BGP view
Parameter
none
Description
Using reflect between-clients command, you can configure the between-client
reflection of a route. Using undo reflect between-clients command, you can disable
this function.
By default, the reflection between clients is enabled.
For the related commands, see reflector cluster-id, peer reflect-client.
Example
# Disable the reflection between clients.
[Quidway-bgp] undo reflect between-clients
5.1.58 reflector cluster-id
Syntax
reflector cluster-id { cluster-id | address }
undo reflector cluster-id

Huawei Quidway S6500 Series Specifications

General

Brand	Huawei
Model	Quidway S6500 Series
Category	Network Router
Language	English