Huawei Quidway S6500 Series Command Manual

Command Manual - Network Protocol
Quidway S6500 Series Ethernet Switches Chapter 7 IPX Configuration Commands
Huawei Technologies Proprietary
7-17
For the related command, see ipx sap timer update.
Example
# Set the aging period of the SAP service entries to five times the update interval.
[Quidway] ipx sap multiplier 5
7.1.22 ipx sap timer update
Syntax
ipx sap timer update seconds
undo ipx sap timer update
View
System view
Parameter
seconds: SAP update interval in the range 10 to 60000 seconds. By default, the value
is 60 seconds.
Description
Using the ipx sap timer update command, you can configure a SAP update interval.
Using the undo ipx sap timer update command, you can restore the default.
Note that this command is invalid if the triggered updates feature is applied on VLAN
interface.
For the related commands, see ipx sap multiplier and ipx update-change-only.
Example
# Set the SAP update interval to 300 seconds.
[Quidway] ipx sap timer update 300
7.1.23 ipx service
Syntax
ipx service service-type name network.node socket hop hops [ preference
preference ]
undo ipx service { service-type [ name [ network.node ] ] [ preference preference ] |
all }
View
System view

Huawei Quidway S6500 Series Specifications

General

Brand	Huawei
Model	Quidway S6500 Series
Category	Network Router
Language	English