Command Manual - VLAN
Quidway S6500 Series Ethernet Switches Chapter 1 VLAN Configuration Commands
Huawei Technologies Proprietary
1-10
View
Ethernet port view
Parameter
vlan-id: ID of the VLAN which a protocol is added to or deleted from.
protocol-index: Value of the protocol index, ranging from 0 to 6. It must be smaller than
protocol-end.
protocol-end: End value of the protocol index, ranging form 0 to 6.
all: All protocols.
Description
Using the port hybrid protocol-vlan vlan command, you can associate a
protocol-based VLAN with the specified port. Using the undo port hybrid
protocol-vlan vlan command, you can delete the association between the port and the
protocol-based VLAN.
Note that only the Hybrid port supports this feature at present. The port must belong to
the VLAN before you associate it with the protocol-based VLAN. Otherwise, it cannot
be associated with the VLAN.
For the related commands, see display protocol-vlan interface.
Example
# Associate Ethernet1/0/1 with protocols 0 to 6 in VLAN 3
[Quidway-Ethernet1/0/1] port hybrid protocol-vlan vlan 3 0 to 6
1.3.4 protocol-vlan vlan slot
Syntax
protocol-vlan vlan vlan-id { protocol-index [ to protocol-end ] | all } slot slot-num
undo protocol-vlan vlan vlan-id { protocol-index [ to protocol-end ] | all } slot slot-num
View
system view
Parameter
vlan-id: ID of the VLAN which a protocol is added to or deleted from.
protocol-index: Value of the protocol index, ranging from 0 to 6. It must be smaller than
protocol-end.
protocol-end: End value of the protocol index, ranging form 0 to 6.
all: All protocols.
To Next Page
Loading...
Need help?
General
