Huawei Quidway S6500 Series Command Manual

Command Manual - Network Protocol
Quidway S6500 Series Ethernet Switches Chapter 7 IPX Configuration Commands
Huawei Technologies Proprietary
7-2
0 RIP general requests received, 0 RIP general responses sent
0 SAP received, 0 SAP sent, 0 SAP discarded
0 SAP requests received, 0 SAP responses sent
7.1.2 display ipx routing-table
Syntax
display ipx routing-table [ network [ verbose ] | protocol { default | direct | rip |
static } [ inactive | verbose ] | statistics | verbose ]
View
Any view
Parameter
network: Displays IPX routing information by specifying a destination network number,
which comprises eight hexadecimal numbers and is in the range 0x1 to 0xFFFFFFFE.
protocol: Displays the IPX routing information by route type.
default: Displays information of all the default routes.
direct: Displays information of all the direct routes.
rip: Displays all the IPX RIP routing information.
static: Displays all the IPX static routing information.
inactive: Displays the inactive routing information.
verbose: Displays the detailed IPX routing information, including the active and
inactive routes.
statistics: Displays the IPX routing statistics.
Description
Using the display ipx routing-table command, you can view the IPX routing
information.
If no parameters are specified, information of all the active IPX routes is displayed.
Example
# Display information of the active IPX routes.
[Quidway] display ipx routing-table
Routing tables:
Summary count: 2
Dest_Ntwk_ID Proto Pre Ticks Hops Nexthop Interface
0x1 Direct 0 1 0 0.0000-0000-0000 Vlan-interface1
0x2 Static 60 1 1 1.000e-0001-0000 Vlan-interface1

Huawei Quidway S6500 Series Specifications

General

Brand	Huawei
Model	Quidway S6500 Series
Category	Network Router
Language	English