Huawei Quidway S6500 Series Command Manual

Command Manual - Network Protocol
Quidway S6500 Series Ethernet Switches Chapter 7 IPX Configuration Commands
Huawei Technologies Proprietary
7-3
Table 7-1 Display information of the display ipx routing-table command
Field Description
Dest_Ntwk_ID Destination network number of the route
Proto Protocol type of the route
Pre Preference of the route
Ticks Tick count of the route
Hops Hop count of the route
Nexthop Next hop of the route
Interface Outgoing interface of the route
# Display the detailed IPX routing information, including the active and inactive routes.
<Quidway> display ipx routing-table verbose
Routing tables:
Destinations: 2 Routes: 3
Destination Network ID: 0x1
Protocol: Direct Preference: 0
Ticks: 1 Hops: 0
Nexthop: 0.0000-0000-0000 Time: 0
Interface: 1.0020-9c68-448e(Vlan-interface1)
State: <Active>
Protocol: Static Preference: -60
Ticks: 1 Hops: 1
Nexthop: 2.000e-0001-0000 Time: 0
Interface: 2.0020-9c68-448f(Vlan-interface2)
State: <Inactive>
Destination Network ID: 0x2
Protocol: Static Preference: 60
Ticks: 1 Hops: 1
Nexthop: 1.000e-0001-0000 Time: 0
Interface: 1.0020-9c68-448e(Vlan-interface1)
State: <Active>
Table 7-2 Display information of the display ipx routing-table verbose command
Field Description
Time
Route aging time; it is 0 for the direct and static routes, meaning they
never time out.
State
The state of the route. It can be active, inactive, or delete (meaning the
route is being deleted).

Huawei Quidway S6500 Series Specifications

General

Brand	Huawei
Model	Quidway S6500 Series
Category	Network Router
Language	English