Command Manual - Network Protocol
Quidway S6500 Series Ethernet Switches Chapter 7 IPX Configuration Commands
Huawei Technologies Proprietary
7-6
Example
# Display the IPX statistics.
<Quidway> display ipx statistics
Received: 0 total, 0 packets pitched
0 packets size errors, 0 format errors
0 bad hops(>16), 0 discarded(hops=16)
0 other errors, 0 local destination
0 can not be dealed
Sent: 0 forwarded, 0 generated
0 no route, 0 discarded
RIP: 0 sent, 0 received
0 responses sent, 0 responses received
0 requests received, 0 requests dealt
0 requests sent, 0 periodic updates
SAP: 0 general requests received
0 specific requests received
0 GNS requests received
0 general responses sent
0 specific responses sent
0 GNS responses sent
0 periodic updates, 0 errors
PING: 0 requests sent, 0 requests received
0 responses sent, 0 responses received
0 responses in time, 0 responses time out
7.1.5 ipx enable
Syntax
ipx enable
undo ipx enable
View
System view
Parameter
None
Description
Using the ipx enable command, you can enable IPX. Using the undo ipx enable
command, you can disable IPX and delete all the IPX configurations.