Huawei Quidway S6500 Series - Page 321

Command Manual - Routing Protocol
Quidway S6500 Series Ethernet Switches Chapter 5 BGP Configuration Commands
Huawei Technologies Proprietary
5-20
Description
Using display bgp routing-table dampened command, you can view BGP dampened
routes.
Example
# View BGP dampened information.
<Quidway> display bgp routing-table dampened
Flags: # - valid ^ - active I - internal
D - damped H - history S - aggregate suppressed
B - balance
Dest/Mask Source Damping-limit Origin As-path
-----------------------------------------------------------------
#D 11.1.0.0/16 133.1.1.2 1:20:00 IGP 200
Table 5-8 Description of information generated by the command display bgp
routing-table dampened
Item Description
Flags
State flags:
# - valid (valid)
^ - active (selected)
D – damped (discarded)
H – history (history)
I – internal (interior gateway protocol)
S - aggregate suppressed (suppressed)
B - balance
#D The valid and damped route
Dest/Mask The dampened route to the destination network 11.1.0.0
Source The nexthop of the route
Damping-li
mit
The time before dampening turns invalid and the route can be
reused.