Command Manual - Routing Protocol
Quidway S6500 Series Ethernet Switches Chapter 2 RIP Configuration Commands
Huawei Technologies Proprietary
2-20
undo traffic-share-across-interface
View
RIP view
Parameter
None
Description
Use the traffic-share-across-interface command to enable RIP to distribute traffic
equally among interfaces by employing equivalent routes.
Use the undo traffic-share-across-interface command to disable traffic sharing
among interfaces.
By default, traffic sharing across RIP interfaces is disabled.
Example
# Enable RIP traffic sharing across interfaces.
[Quidway-rip] traffic-share-across-interface
To Next Page
Loading...
