Huawei Quidway S6500 Series - Page 591

Command Manual - Security
Quidway S6500 Series Ethernet Switches Chapter 2 AAA Configuration Commands
Huawei Technologies Proprietary
2-25
2.2.6 display radius statistics
Syntax
display radius statistics
View
Any view
Parameter
None
Description
Using display radius statistics command, you can view the statistics information of
RADIUS packet.
This command outputs the statistics information about the RADIUS packets. The
displayed packet information can help with RADIUS diagnosis and troubleshooting.
For the related command, see radius scheme.
Example
# Display the statistics information of RADIUS packets.
<Quidway> display radius statistics
state statistic(total=4120):
DEAD=4120 AuthProc=0 AuthSucc=0
AcctStart=0 RLTSend=0 RLTWait=0
AcctStop=0 OnLine=0 Stop=0
StateErr=0
Received and Sent packets statistic:
Sent PKT total :0 Received PKT total:0
RADIUS received packets statistic:
Code= 2,Num=0 ,Err=0
Code= 3,Num=0 ,Err=0
Code= 5,Num=0 ,Err=0
Code=11,Num=0 ,Err=0
Running statistic:
RADIUS received messages statistic:
Normal auth request , Num=0 , Err=0 , Succ=0
EAP auth request , Num=0 , Err=0 , Succ=0
Account request , Num=0 , Err=0 , Succ=0
Account off request , Num=0 , Err=0 , Succ=0