Command Manual - Network Protocol
Quidway S6500 Series Ethernet Switches
Chapter 3 ARP Source Suppression
Configuration Commands
Huawei Technologies Proprietary
3-3
Table 3-1 Description on the fields of the display arp source-suppression command
Field Description
ARP suppression limit total:
Maximum number of any ARP packets sent to the
CPU in unit time
ARP suppression limit local:
Maximum number of ARP packets sent to the CPU
in unit time. These packets have the same source
IP addresses and their destination addresses are
the IP address of the current switch.
ARP suppression limit
through:
Maximum number of passing ARP packets sent to
the CPU in unit time. These packets have the same
source IP addresses and their destination
addresses are not the IP address of the current
switch.
To Next Page
Loading...
