Huawei Quidway S6500 Series Command Manual

Command Manual - Getting Started
Quidway S6500 Series Ethernet Switches Chapter 1 Logging in Ethernet Switch Commands
Huawei Technologies Proprietary
1-5
Description
Using display user-interface command, you can view the relational information of the
user interface. This command without the summary parameter displays user interface
type, absolute/relative index, transmission speed, priority, authentication methods, and
physical location. This command with the summary parameter displays one user
interface in use totally and user interface name etc.
Example
# Display the relational information of user interface 0.
<Quidway> display user-interface 0
Idx Type Tx/Rx Modem Privi Auth Int
F 0 AUX 0 9600 - 3 N -
+ : Current user-interface is active.
F : Current user-interface is active and work in async mode.
Idx : Absolute index of user-interface.
Type : Type and relative index of user-interface.
Privi: The privilege of user-interface.
Auth : The authentication mode of user-interface.
Int : The physical location of UIs.
A : Authentication use AAA.
N : Current UI need not authentication.
P : Authentication use current UI's password.
Table 1-1 Output description of the display user-interface command
Field Description
+ Current user interface is in use
F Current user interface is in use and work in asynchronous mode
Idx Absolute index of user interface
Type Type and relative index of user interface
Tx/Rx User interface speed
Modem Modem operation mode
Privi
Which levels of commands can be used after logging in from the user
interface
Auth User interface authentication method
Int The physical location of user interfaces
# Display the summary information of user interface 0.

Huawei Quidway S6500 Series Specifications

General

Brand	Huawei
Model	Quidway S6500 Series
Category	Network Router
Language	English