Huawei Quidway S6500 Series Command Manual

Command Manual - Network Protocol
Quidway S6500 Series Ethernet Switches
Chapter 6 IP Performance Configuration
Commands
Huawei Technologies Proprietary
6-9
Description
Using the display udp statistics command, you can view UDP traffic statistic
information.
The statistic information includes sent and received packets, which include different
types of packets such as checksum and error packets. The statistic information also
includes information related closely to connections such as the number of broadcast
packets. Note that the above information is count in packets.
For relate configuration, please refer to the reset udp statistics command.
Example
# Display the UDP traffic statistic information.
<Quidway> display udp statistics
Received packet:
Total:0
checksum error:0
shorter than header:0, data length larger than packet:0
no socket on port:0
broadcast:0
not delivered, input socket full:0
input packets missing pcb cache:0
Sent packet:
Total:0
6.1.8 ip
Syntax
ip { redirects | ttl-expires | unreachables }
undo ip { redirects | ttl-expires | unreachables }
View
System view
Parameter
redirects: Set whether to send redirection packets to CPU.
ttl-expires: Set whether to send TTL timeout packets to CPU.
unreachables: Set whether to send route unreachable packets to CPU.
Description
Using ip { redirects | ttl-expires | unreachables } command, you can set redirection
packets, TTL timeout packets and route unreachable packets sent to CPU for further

Huawei Quidway S6500 Series Specifications

General

Brand	Huawei
Model	Quidway S6500 Series
Category	Network Router
Language	English