Huawei Quidway S6500 Series - Page 193

Command Manual - Routing Protocol
Quidway S6500 Series Ethernet Switches
0错误！表格结果无效。
Huawei Technologies Proprietary
1-18
undo ip route-static default-preference
View
System view
Parameter
default-preference-value: The default preference value of static routes, which will be
the preference value of the static route if its preference is not specified when configured.
Its default value is 60.
Description
Using ip route-static default-preference command, you can configure the default
preference value of static routes. Using undo ip route-static default-preference
command, you can restore the default value.
A static route’s preference will be the default-preference-value set by this command if
its preference is not specified when configured by ip route-static command.
For the related commands, see display ip routing-table, ip route-static.
Example
# Configure the default preference of static routes as 120.
[Quidway] ip route-static default-preference 120