Huawei Quidway S6500 Series Command Manual

Command Manual - Getting Started
Quidway S6500 Series Ethernet Switches Chapter 1 Logging in Ethernet Switch Commands
Huawei Technologies Proprietary
1-18
undo service-type { ftp [ ftp-directory ] | lan-access | { ssh | telnet | terminal }*
[ level level ] }
View
Local user view
Parameter
telnet: Specifies user type as Telnet.
ssh: Specifies user type as SSH.
ftp: Specifies user type as ftp.
ftp-directory directory: Specifies the directory of ftp users, directory is a character
string of up to 64 characters.
lan-access: Specifies user type to lan-access, which mainly refers to Ethernet
accessing users, 802.1x supplicants for example.
terminal: Authorizes the user to use the terminal service (login from the Console port).
level level: Specifies the level of Telnet, SSH or terminal users. The argument level is
an integer in the range of 0 to 3 and defaults to 0.
Description
Use the service-type command to configure the log type and the command level can
be accessed after the logon. Use the undo service-type command to cancel the
setting.
Commands are classified into four levels, namely visit level, monitoring level, system
level and management level. They are introduced as follows:
z Visit level: Commands of this level involve command of network diagnosis tool
(such as ping and tracert), command of switch between different language
environments of user interface (language-mode), and telnet command etc. The
operation of saving configuration file is not allowed on this level of commands.
z Monitoring level: Commands of this level, including the display command and the
debugging command, are used for system maintenance, service fault diagnosis,
etc. The operation of saving the configuration file is not allowed on this level of
commands.
z System level: Service configuration commands, including routing command and
commands on each network layer, are used to provide direct network service to
the user.
z Management level: These are commands that influence the basic operation of the
system and system support module, which plays a supporting role on service.
Commands of this level involve file system commands, FTP commands, TFTP
commands, user management commands, and level setting commands.

Huawei Quidway S6500 Series Specifications

General

Brand	Huawei
Model	Quidway S6500 Series
Category	Network Router
Language	English