EasyManuals Logo

Huawei Quidway S6500 Series Command Manual

Huawei Quidway S6500 Series
845 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #314 background imageLoading...
Page #314 background image
Command Manual - Routing Protocol
Quidway S6500 Series Ethernet Switches Chapter 5 BGP Configuration Commands
Huawei Technologies Proprietary
5-13
Parameter
peer-address: Specify the peer to be displayed.
Description
Using display bgp peer command, you can view the information about BGP peers.
Example
# Display the detail information of the peer 10.110.25.20.
<Quidway> display bgp peer 10.110.25.20 verbose
Peer: 10.110.25.20 Local: Unspecified
Type: External
State: Idle Flags: <Idled>
Last State: NoState Last Event: NoEvent
Last Error: None
Options: <>
Configuration within the peer :
no export policy route-policy
no export policy ip-prefix
no export policy filter-policy
no export policy acl
no import policy route-policy
no import policy ip-prefix
no import policy filter-policy
no import policy acl
no default route produce
Table 5-5 Description of information generated by the command display bgp peer
verbose
Field Description
Peer
IP address of peer and port number used by the peer to establish
TCP connection
Local
IP address and port number used to establish TCP connection of
local end
Type Type of peer: Internal for IBGP, and External for EBGP
State State of peer
Flags Flags of peer
Last State Last state before entering current state
Last Event Last event of neighbor state machine

Table of Contents

Other manuals for Huawei Quidway S6500 Series

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Huawei Quidway S6500 Series and is the answer not in the manual?

Huawei Quidway S6500 Series Specifications

General IconGeneral
BrandHuawei
ModelQuidway S6500 Series
CategoryNetwork Router
LanguageEnglish

Related product manuals