Huawei Quidway S6500 Series Command Manual

Command Manual - Routing Protocol
Quidway S6500 Series Ethernet Switches Chapter 5 BGP Configuration Commands
Huawei Technologies Proprietary
5-16
Parameter
acl-number: Specify matched AS path list number ranging from 1 to 199.
Description
Using display bgp routing-table as-path-acl command, you can view routes that
match an as-path acl.
Example
# Display routes that match the as-path-acl 1.
<Quidway> display bgp routing-table as-path-acl 1
Flags: # - valid ^ - active I - internal
D - damped H - history S - aggregate suppressed
B - balance
Dest/Mask Pref Next-Hop Med Local-pref Origin As-path
--------------------------------------------------------------------
#^ 1.1.1.0/24 256 10.10.10.1 0 IGP 200
#^ 1.1.2.0/24 256 10.10.10.1 0 IGP 200
#^ 1.1.3.0/24 256 10.10.10.1 0 IGP 200
#^ 2.2.3.0/24 256 10.10.10.1 0 INC 200
#^ 4.4.4.0/24 256 10.10.10.1 0 INC 200
#^ 9.9.9.0/24 256 10.10.10.1 0 INC 200
#^ 10.10.10.0/24 256 10.10.10.1 0 IGP 200
#^ 22.1.0.0/16 256 200.1.7.2 100 INC 200
# 88.1.0.0/16 60 0.0.0.0 IGP
Table 5-7 Description of information generated by the command display bgp
routing-table as-path-acl
Field Description
Dest/Mask Destination address/Mask
Pref Preference
Nexthop IP address of next hop
Med MULTI_EXIT_DISC attribute value
Local-pref Local preference

Huawei Quidway S6500 Series Specifications

General

Brand	Huawei
Model	Quidway S6500 Series
Category	Network Router
Language	English