Huawei Quidway S6500 Series - Page 352

Command Manual - Routing Protocol
Quidway S6500 Series Ethernet Switches Chapter 5 BGP Configuration Commands
Huawei Technologies Proprietary
5-51
View
User view
Parameter
group-name: Specify the name of the peer group.
Description
Using reset bgp group command, you can reset the connections between the BGP
and all the members of a group.
For the related commands, see peer group.
Example
# Reset BGP connections of all members from group1.
<Quidway> reset bgp group group1
5.1.64 summary
Syntax
summary
undo summary
View
BGP view
Parameter
none
Description
Using summary command, you can configure auto aggregation of sub-network routes
and disable it by using undo summary command,.
By default, no auto aggregation of sub-network routes is executed.
After the summary is configured, BGP cannot receive the sub-network routes imported
from the IGP, so the amount of the routing information can be reduced.
Example
# Make the auto aggregation of the sub-network routes.
[Quidway-bgp] summary