Huawei Quidway S6500 Series Command Manual

Command Manual - QoS/ACL
Quidway S6500 Series Ethernet Switches Chapter 1 ACL Command
Huawei Technologies Proprietary
1-17
If a time range only defines the period time range, the time range is only active within
the period time range.
If a time range only defines the absolute time range, the time range is only active within
the absolute time range.
If a time range defines the period time range and the absolute time range, the time
range is only active when the period time range and the absolute time range are both
matched. For example, a time range defines a period time range which is from 12:00 to
14:00 every Wednesday, and defines an absolute time range which is from 00:00
2004/1/1 to 23:59 2004/12/31. This time range is only active from 12:00 to 14:00 every
Wednesday in 2004.
If neither starting time nor end time is specified, the time range is 24 hours (0:00 to
24:00).
If no end date is specified, the time range is from the date of configuration till the largest
date available in the system.
If you input the parameter when use the undo time-range command, the system will
delete the corresponding content of the time range according to the parameter input.
Example
# Configure a time range being effective since zero hour on January 1, 2000 and
forever.
[Quidway] time-range test from 0:0 2000/1/1

Huawei Quidway S6500 Series Specifications

General

Brand	Huawei
Model	Quidway S6500 Series
Category	Network Router
Language	English