Command Manual - QoS/ACL
Quidway S6500 Series Ethernet Switches Chapter 2 Qos Command
Huawei Technologies Proprietary
2-32
 Note:
Combined activating of IP ACL and Link ACL is supported by the cards except A type
ones. But the sum of the bytes number defined by IP ACL and that defined by the Link
ACL can not exceed 32 bytes; otherwise the ACL can not be activated.
View
QoS view
Parameter
inbound: Performs priority marking to the packets received by the interface.
outbound: Performs priority marking to the packets sent by the interface.
ip-group { acl-number | acl-name } [ rule rule ]: the basic or advanced ACLs;
acl-number: the sequence number of ACLs, ranging from 2000~3999; acl-number: the
name of ACLs, character string, which must be started with an English letter (i.e., a-z or
A-Z), and there should not be a space or quotation mark in it; rule rule: (Optional)
specifies a subitem of an ACL, ranging from 0 to 127, it represents all the subitems of
the ACL if not specified.
link-group { acl-number | acl-name } [ rule rule ] : The Layer 2 ACL; acl-number: the
sequence number of an ACL, ranging from 4000~4999; acl-name: the name of an ACL,
character string, which must be started with an English letter (i.e., a-z or A-Z), and there
should not be a space or quotation mark in it; rule rule: (Optional) specifies the subitem
of an ACL, ranging from 0 to 127, it represents all the subitems of the ACL if not
specified.
user-group { acl-number | acl-name }: activate the user-defined ACL. acl-number:
Specifies the ACL number, ranging from 5000 to 5999. acl-name: Specifies the ACL
name with a character string started with English letters (that is [a to z, A to Z]),
excluding space and quotation marks.
dscp dscp-value: Set DSCP precedence, ranging from 0 to 63.
ip-precedence pre-value: Set IP precedence, pre-value is the IP precedence, ranging
from 0 to 7.
cos cos: Specifies 802.1p preference, ranging from 0 to 7.
local-precedence pre-value: Set local precedence, ranging from 0 to 7.
To Next Page
Loading...
