Huawei Quidway S6500 Series - Page 546

Command Manual - STP
Quidway S6500 Series Ethernet Switches
Chapter 4 Rapid Transition Configuration
Commands
Huawei Technologies Proprietary
4-3
receive proposal packets from the upstream designated ports rather than wait for the
agreement packets sourced from the upstream switch. This enables designated ports
of the upstream switch to change their states rapidly.
Related command: stp interface no-agreement-check.
 Note:
Configure rapid transition for root port or Alternate port only.
Example
# Enable rapid transition on Ethernet3/0/1 port.
<Quidway> system-view
System View: return to User View with Ctrl+Z.
[Quidway]interface Ethernet3/0/1
[Quidway-Ethernet3/0/1]stp no-agreement-check
[Quidway-Ethernet3/0/1]