Huawei Quidway S6500 Series Command Manual

Command Manual - System Management
Quidway S6500 Series Ethernet Switches Chapter 1 File System Management Commands
Huawei Technologies Proprietary
1-13
display the running parameters. Although the user has configured some parameters,
but the related functions are not effective, they are not displayed.
When there is much configuration information, you can use the regular expression to
filter the output information. For specific rules about the regular expression, refer to the
corresponding operation manual.
For the related command, see save, reset saved-configuration and display
saved-configuration.
Example
# View the running configuration parameters of the switch.
<Quidway> display current-configuration
#
sysname Quidway
#
radius scheme system
server-type nec
primary authentication 127.0.0.1 1645
primary accounting 127.0.0.1 1646
user-name-format without-domain
domain system
radius-scheme system
access-limit disable
state active
idle-cut disable
domain default enable system
#
local-server nas-ip 127.0.0.1 key hello
#
router id 2.2.2.2
#
stp timer hello 500
#
vlan 1
#
vlan 2
#
interface Vlan-interface1
#
interface Vlan-interface2

Huawei Quidway S6500 Series Specifications

General

Brand	Huawei
Model	Quidway S6500 Series
Category	Network Router
Language	English