Command Manual - System Management
Quidway S6500 Series Ethernet Switches Chapter 5 SNMP Configuration Commands
Huawei Technologies Proprietary
5-6
9230 GetResponse-PDU accepted and processed
1 SetRequest-PDU accepted and processed
34 Trap PDUs accepted and processed
The following table describes the output fields.
Table 5-3 Output description of the display snmp-agent statistics command
Field Description
9232 Messages delivered to the SNMP
entity
Total number of the input SNMP packets
0 Messages which were for an
unsupported version
Number of packets with version
information error
0 Messages which used a SNMP
community name not known
Number of packets with community
name error
0 Messages which represented an
illegal operation for the community
supplied
Number of packets with authority error
corresponding to the community name
0 ASN.1 or BER errors in the process of
decoding
Number of SNMP packets with encoding
error
9266 Messages passed from the SNMP
entity
Total number of the output SNMP
packets
0 SNMP PDUs which had badValue
error-status
Number of SNMP packets with
Bad_values error
0 SNMP PDUs which had genErr
error-status
Number of SNMP packets with
General_errors
11 SNMP PDUs which had
noSuchName error-status
Number of the packets requesting
nonexistent MIB objects
0 SNMP PDUs which had tooBig
error-status (Maximum packet size
1800)
Number SNMP packet with too_big error
33029 MIB objects retrieved
successfully
Number of variables requested by NMS
2 MIB objects altered successfully The number of variables set by NMS
714 GetRequest-PDU accepted and
processed
Number of the received packets
requested by get
8514 GetNextRequest-PDU accepted
and processed
Number of the received packets
requested by get-next
10 GetBulkRequest-PDU accepted and
processed
Number of the received packets
requested by get-bulk
9230 GetResponse-PDU accepted and
processed
Number of the response packets sent
1 SetRequest-PDU accepted and
processed
Number of the received packets
requested by set