Huawei Quidway S6500 Series - Page 757

Command Manual - System Management
Quidway S6500 Series Ethernet Switches Chapter 6 RMON Configuration Commands
Huawei Technologies Proprietary
6-6
Description
Using display rmon prialarm command, you can view information about extended
alarm table.
For the related commands, see rmon prialarm.
Example
# display alarm information about extended RMON.
<Quidway> display rmon prialarm
Prialarm table 1 owned by abc is VALID.
Samples type : delta
Variable formula : .1.3.6.1.2.1.2.2.1.10.641
Description : ifInOctets.Ethernet1/0/1
Sampling interval : 10(sec)
Rising threshold : 100(linked with event 2)
Falling threshold : 10(linked with event 2)
When startup enables : risingOrFallingAlarm
This entry will exist : forever.
Latest value : 0
Table 6-5 Output description of the display rmon prialarm command
Field Description
Prialarm table 1 Index of extended alarm entry
owned by abc Creator of the extended alarm entry
VALID The entry corresponding to the index is valid.
Samples type The sampling type
Variable formula The variable formula of the node
Description The description of the alarm variable
Rising threshold
Rising threshold. When sampling value rises from
normal value to this threshold, rising threshold alarm
will be triggered.
Falling threshold
Falling threshold. When sampling value decreases from
normal value to this threshold, falling threshold alarm
will be triggered.
linked with event 2
Corresponding event index of ring and falling threshold
alarm
When startup enables:
risingOrFallingAlarm
Kind of first alarm. It may trigger rising threshold alarm
or falling threshold alarm or both.
This entry will exist
forever
The lifespan of this alarm entry which can be forever or
a specified period of time.