Huawei Quidway S6500 Series Command Manual

Command Manual - PoE
Quidway S6500 Series Ethernet Switches Chapter 1 PoE Configuration Commands
Huawei Technologies Proprietary
1-2
Table 1-1 Output description of the display poe interface command
Field Description
Port power status
PoE status of the port:
1) disabled: PoE is disabled on the port
2) searching: The port is searching for a PD
3) delivering: The port is supplying power to the PD
4) PD disconnected: The port is not connected with a
PD
5) testing: In test
6) fault: A nonstandard or fault PD is detected
Port power mode
PoE mode of the port:
1) signal
2) spare
Port PD class Power class of the port
Port power priority
Port priority:
1) critical
2) high
3) low
Port max power Maximum power on the port
Port current power Present power on the port
Port Average power Average power on the port
Port peak power Peak power on the port
Port current Present current on the port
Port voltage Present voltage on the port
# Display the PoE status of all ports.
<Quidway> display poe interface all
Interface Ethernet3/0/1 power status: delivering
Interface Ethernet3/0/2 power status: PD searching
Interface Ethernet3/0/3 power status: PD searching
Interface Ethernet3/0/4 power status: PD searching
Interface Ethernet3/0/5 power status: PD searching
Interface Ethernet3/0/6 power status: PD searching
Interface Ethernet3/0/7 power status: PD searching
Interface Ethernet3/0/8 power status: PD searching
Interface Ethernet3/0/9 power status: PD searching
Interface Ethernet3/0/10 power status: PD searching
Interface Ethernet3/0/11 power status: PD searching
Interface Ethernet3/0/12 power status: PD searching
Interface Ethernet3/0/13 power status: PD searching

Huawei Quidway S6500 Series Specifications

General

Brand	Huawei
Model	Quidway S6500 Series
Category	Network Router
Language	English