Huawei Quidway S6500 Series Command Manual

Command Manual - PoE
Quidway S6500 Series Ethernet Switches Chapter 1 PoE Configuration Commands
Huawei Technologies Proprietary
1-14
low: Sets the port priority to the low.
Description
Using the poe priority command, you can configure the power supply priority on a port.
Using the undo poe priority command, you can restore the default priority.
By default, the port priority is low.
Note:
This command is used together with the poe power-management command, and
takes effect when the PoE power output of the switch reaches nearly to its maximum
value.
Example
# Set the port priority to critical.
<Quidway> system-view
System View: return to User View with Ctrl+Z.
[Quidway] interface ethernet3/0/1
[Quidway-Ethernet3/0/1] poe priority critical
# Restore the default priority.
<Quidway> system-view
System View: return to User View with Ctrl+Z.
[Quidway] interface ethernet3/0/1
[Quidway-Ethernet3/0/1] undo poe priority

Huawei Quidway S6500 Series Specifications

General

Brand	Huawei
Model	Quidway S6500 Series
Category	Network Router
Language	English