Agilent Technologies InfiniiVision 3000 X-Series - Reference Waveforms; Save Waveform to Reference Location

Commands Quick Reference 4
Agilent InfiniiVision 3000 X-Series Oscilloscopes Programmer's Guide 101
:MEASure:PWIDth
[<source>] (see
page 437)
:MEASure:PWIDth?
[<source>] (see
page 437)
<source> ::= {CHANnel<n> |
FUNCtion | MATH | WMEMory<r>} for
DSO models
<source> ::= {CHANnel<n> |
DIGital<d> | FUNCtion | MATH |
WMEMory<r>} for MSO models
<n> ::= 1 to (# analog channels)
in NR1 format
<r> ::= 1-2 in NR1 format
<d> ::= 0 to (# digital channels
- 1) in NR1 format
<return_value> ::= width of
positive pulse in seconds in NR3
format
n/a :MEASure:RESults?
<result_list> (see
page 438)
<result_list> ::=
comma-separated list of
measurement results
:MEASure:RISetime
[<source>] (see
page 441)
:MEASure:RISetime?
[<source>] (see
page 441)
<source> ::= {CHANnel<n> |
FUNCtion | MATH | WMEMory<r>}
<n> ::= 1 to (# analog channels)
in NR1 format
<r> ::= 1-2 in NR1 format
<return_value> ::= rise time in
seconds in NR3 format
:MEASure:SDEViation
[<source>] (see
page 442)
:MEASure:SDEViation?
[<source>] (see
page 442)
<source> ::= {CHANnel<n> |
FUNCtion | MATH | WMEMory<r>}
<n> ::= 1 to (# analog channels)
in NR1 format
<r> ::= 1-2 in NR1 format
<return_value> ::= calculated
std deviation in NR3 format
:MEASure:SHOW {1 |
ON} (see page 443)
:MEASure:SHOW? (see
page 443)
{1}
Table 17 :MEASure Commands Summary (continued)
Command Query Options and Query Returns