Agilent Technologies InfiniiVision 3000 X-Series - Page 309

s1
309
Agilent InfiniiVision 3000 X-Series Oscilloscopes
Programmer's Guide
14
:DVM Commands
When the optional DSOXDVM digital voltmeter analysis feature is licensed,
these commands control the digital voltmeter (DVM) feature.
Table 86 :DVM Commands Summary
Command Query Options and Query Returns
:DVM:ARANge {{0 |
OFF} | {1 | ON}} (see
page 310)
:DVM:ARANge? (see
page 310)
{0 | 1}
n/a :DVM:CURRent? (see
page 311)
<dvm_value> ::= floating-point
number in NR3 format
:DVM:ENABle {{0 |
OFF} | {1 | ON}} (see
page 312)
:DVM:ENABle? (see
page 312)
{0 | 1}
n/a :DVM:FREQuency? (see
page 311)
<freq_value> ::= floating-point
number in NR3 format
:DVM:MODE <mode> (see
page 314)
:DVM:MODE? (see
page 314)
<dvm_mode> ::= {ACRMs | DC |
DCRMs | FREQuency}
:DVM:SOURce <source>
(see page 315)
:DVM:SOURce? (see
page 315)
<source> ::= {CHANnel<n>}
<n> ::= 1-2 or 1-4 in NR1 format