348 Agilent InfiniiVision 3000 X-Series Oscilloscopes Programmer's Guide
16 :FUNCtion Commands
Query Syntax :FUNCtion:OPERation?
The :FUNCtion:OPERation? query returns the current operation for the
selected function.
Return Format
<operation><NL>
<operation> ::= {ADD | SUBT | MULT | INT | DIFF | FFT | SQRT | MAGN
| ABS | SQU | LN | LOG | EXP | TEN | LOWP | HIGH | DIV | LIN | TREN
| BTIM | BST}
See Also • "Introduction to :FUNCtion Commands" on page 326
• ":FUNCtion:SOURce1" on page 352
• ":FUNCtion:SOURce2" on page 354
To Next Page
Loading...
