Agilent Technologies InfiniiVision 3000 X-Series Programmer's Guide

4 Agilent InfiniiVision 3000 X-Series Oscilloscopes Programmer's Guide
• Chapter 9, “:CALibrate Commands,” starting on page 251, describes
utility commands for determining the state of the calibration factor
protection button.
• Chapter 10, “:CHANnel<n> Commands,” starting on page 261, describes
commands that control all oscilloscope functions associated with
individual analog channels or groups of channels.
• Chapter 11, “:DEMO Commands,” starting on page 281, describes
commands that control the education kit (Option EDU) demonstration
signals that can be output on the oscilloscope's Demo 1 and Demo 2
terminals.
• Chapter 12, “:DIGital<d> Commands,” starting on page 289, describes
commands that control all oscilloscope functions associated with
individual digital channels.
• Chapter 13, “:DISPlay Commands,” starting on page 297, describes
commands that control how waveforms, graticule, and text are displayed
and written on the screen.
• Chapter 14, “:DVM Commands,” starting on page 309, describes
commands that control the optional DSOXDVM digital voltmeter analysis
feature.
• Chapter 15, “:EXTernal Trigger Commands,” starting on page 317,
describes commands that control the input characteristics of the
external trigger input.
• Chapter 16, “:FUNCtion Commands,” starting on page 323, describes
commands that control math waveforms.
• Chapter 17, “:HARDcopy Commands,” starting on page 357, describes
commands that set and query the selection of hardcopy device and
formatting options.
• Chapter 18, “:LISTer Commands,” starting on page 375, describes
commands that turn on/off the Lister display for decoded serial data
and get the Lister data.
• Chapter 19, “:MARKer Commands,” starting on page 379, describes
commands that set and query the settings of X- axis markers (X1 and
X2 cursors) and the Y- axis markers (Y1 and Y2 cursors).
• Chapter 20, “:MEASure Commands,” starting on page 395, describes
commands that select automatic measurements (and control markers).
• Chapter 21, “:MEASure Power Commands,” starting on page 469,
describes measurement commands that are available when the
DSOX3PWR power measurements and analysis application is licensed
and enabled.
• Chapter 22, “:MTESt Commands,” starting on page 489, describes
commands that control the mask test features provided with
Option LMT.

Agilent Technologies InfiniiVision 3000 X-Series Specifications

General

Brand	Agilent Technologies
Model	InfiniiVision 3000 X-Series
Category	Test Equipment
Language	English