Agilent Technologies InfiniiVision 3000 X-Series

40 Agilent InfiniiVision 3000 X-Series Oscilloscopes Programmer's Guide
1 What's New
Changed
Commands
Command Differences
:DEMO:FUNCtion (see page 282) The FMBurst, ARINc, FLEXray, MIL, and MIL2
functions are now available with the DSOXEDK
educator's kit license.
:FUNCtion:OPERation (see page 347)The MAGNify, ABSolute, SQUare, LN, LOG,
EXP, TEN, LOWPass, HIGHpass, DIVide, LINear,
TRENd, BTIMing, and BSTate operations are
now available with the DSOX3ADVMATH
advanced math measurements license.
:FUNCtion:SOURce1 (see page 352) The BUS<m> source is now available for the
bus charting operations available with the
DSOX3ADVMATH advanced math
measurements license.
:SBUS<n>:MODE (see page 633) The A429, M1553, and FLEXray modes are now
available with the DSOX3AERO (MIL-STD-1553
and ARINC 429) and DSOX3FLEX (FlexRay)
serial decode and triggering licenses.
:TRIGger:TV:MODE (see page 945) The LINE mode is added for the video
standards available with the extended Video
triggering license.
:TRIGger:TV:STANdard (see page 948) Lets you select additional video standards
available with the extended Video triggering
license.
:WGEN:FUNCtion (see page 1007) The ARBitrary waveform type can now be
selected.