Agilent Technologies InfiniiVision 3000 X-Series Programmer's Guide

:MEASure Power Commands 21
Agilent InfiniiVision 3000 X-Series Oscilloscopes Programmer's Guide 471
:MEASure:REACtive
[<source1>][,<source2
>] (see page 485)
:MEASure:REACtive?
[<source1>][,<source2
>] (see page 485)
<source1>, <source2> ::=
{CHANnel<n>}
<n> ::= 1 to (# analog channels)
in NR1 format
<return_value> ::= the reactive
power value in NR3 format
:MEASure:REAL
[<source>] (see
page 486)
:MEASure:REAL?
[<source>] (see
page 486)
<source> ::= {CHANnel<n>|
FUNCtion | MATH}
<n> ::= 1 to (# analog channels)
in NR1 format
<return_value> ::= the real power
value in NR3 format
:MEASure:RIPPle
[<source>] (see
page 487)
:MEASure:RIPPle?
[<source>] (see
page 487)
<source> ::= {CHANnel<n>|
FUNCtion | MATH | WMEMory<r>}
<n> ::= 1 to (# analog channels)
in NR1 format
<r> ::= 1-2 in NR1 format
<return_value> ::= the output
ripple value in NR3 format
:MEASure:TRESponse
[<source>] (see
page 488)
:MEASure:TRESponse?
[<source>] (see
page 488)
<source> ::= {CHANnel<n>|
FUNCtion | MATH | WMEMory<r>}
<n> ::= 1 to (# analog channels)
in NR1 format
<r> ::= 1-2 in NR1 format
<return_value> ::= time in
seconds for the overshoot to
settle back into the band in NR3
format
Table 93 :MEASure Power Commands Summary (continued)
Command Query Options and Query Returns

Agilent Technologies InfiniiVision 3000 X-Series Specifications

General

Brand	Agilent Technologies
Model	InfiniiVision 3000 X-Series
Category	Test Equipment
Language	English