Agilent Technologies InfiniiVision 3000 X-Series Programmer's Guide

:POWer Commands 24
Agilent InfiniiVision 3000 X-Series Oscilloscopes Programmer's Guide 533
:POWer:SIGNals:SOURce
:VOLTage<i> <source>
(see page 582)
:POWer:SIGNals:SOURce
:VOLTage<i>? (see
page 582)
<i> ::= 1, 2 in NR1 format
<source> ::= CHANnel<n>
<n> ::= 1 to (# analog channels)
in NR1 format
:POWer:SLEW:APPLy
(see page 583)
n/a n/a
:POWer:SLEW:SOURce
<source> (see
page 584)
:POWer:SLEW:SOURce?
(see page 584)
<source> ::= {V | I}
:POWer:SWITch:APPLy
(see page 585)
n/a n/a
:POWer:SWITch:CONDuct
ion <conduction> (see
page 586)
:POWer:SWITch:CONDuct
ion? (see page 586)
<conduction> ::= {WAVeform | RDS
| VCE}
:POWer:SWITch:IREFere
nce <percent> (see
page 587)
:POWer:SWITch:IREFere
nce? (see page 587)
<percent> ::= percent in NR1
format
:POWer:SWITch:RDS
<value>[suffix] (see
page 588)
:POWer:SWITch:RDS?
(see page 588)
<value> ::= Rds(on) value in NR3
format
[suffix] ::= {OHM | mOHM}
:POWer:SWITch:VCE
<value>[suffix] (see
page 589)
:POWer:SWITch:VCE?
(see page 589)
<value> ::= Vce(sat) value in NR3
format
[suffix] ::= {V | mV}
:POWer:SWITch:VREFere
nce <percent> (see
page 590)
:POWer:SWITch:VREFere
nce? (see page 590)
<percent> ::= percent in NR1
format
:POWer:TRANsient:APPL
y (see page 591)
n/a n/a
:POWer:TRANsient:EXIT
(see page 592)
n/a n/a
:POWer:TRANsient:IINi
tial <value>[suffix]
(see page 593)
:POWer:TRANsient:IINi
tial? (see page 593)
<value> ::= Initial current value
in NR3 format
[suffix] ::= {A | mA}
:POWer:TRANsient:INEW
<value>[suffix] (see
page 594)
:POWer:TRANsient:INEW
? (see page 594)
<value> ::= New current value in
NR3 format
[suffix] ::= {A | mA}
:POWer:TRANsient:NEXT
(see page 595)
n/a n/a
Table 96 :POWer Commands Summary (continued)
Command Query Options and Query Returns

Agilent Technologies InfiniiVision 3000 X-Series Specifications

General

Brand	Agilent Technologies
Model	InfiniiVision 3000 X-Series
Category	Test Equipment
Language	English