Epson AcuLaser CX11 - Page 511

EPSON AcuLaser CX11/CX11F Revision B
DISASSEMBLY AND ASSEMBLY ADF Section 513
13. Remove the two screws (M3 x 8 mm, P-type, A-head) that secure the FIX PLATE
ASSY to the ADF FRAME UNIT, and remove the FIX PLATE ASSY.
14. Remove BUSH D6 from the shaft of the TURNING ROLLER and the shaft of the
EXIT ROLL ASSY respectively.
15. Remove the two screws (M3 x 8 mm, P-type, A-head) that secure the GUIDE
FRONT ASSY to the ADF FRAME UNIT, and remove the GUIDE FRONT
ASSY.
Figure 4-202. Removal of GUIDE FRONT ASSY (5)
Figure 4-203. Removal of GUIDE FRONT ASSY (6)
Figure 4-204. Removal of GUIDE FRONT ASSY (7)
13)
FIX PLATE ASSY
14)
Shaft of EXIT ROLL ASSYShaft of TURNING ROLLER
15)
GUIDE FRONT ASSY