Epson AcuLaser CX11 Service Manual

EPSON AcuLaser CX11/CX11F Revision B
APPENDIX Fax Unit System 643
LIN_TAM_SOUNDLESS_LEVEL 300 041
---
06B
Noiseless level at TAM setting
According to the noiseless level, a call received by an answer phone
(attached phone) is judged as a fax.
0 = -43dBm
1 = -40dBm
2 = -39dBm
3 = -38dBm
-43dBm
(0)
---
LIN_TAM_SOUNDLESS_TIME 300 042
---
06C
Noiseless time at TAM setting
When the set noiseless level continues for the time, a call received
by an answer phone (attached phone) is judged as a fax.
0 to 25.5 sec (1 step = 100 ms)
5.0 seconds
(50)
---
LIN_DRPD_ON_MIN 300 043
---
06D
Minimum ON time of distinctive ring 0 to 25.5 sec (1 step = 100 ms) 1.6 seconds
(16)
---
LIN_DRPD_ON_MAX 300 044
---
06E
Maximum ON time of distinctive ring 0 to 25.5 sec (1 step = 100 ms) 2.4 seconds
(24)
---
LIN_DRPD_OFF_MIN 300 045
---
06F
Minimum OFF time of distinctive ring 0 to 25.5 sec (1 step = 100 ms) 3.2 seconds
(32)
---
LIN_DRPD_OFF_MAX 300 046
---
070
Maximum OFF time of distinctive ring 0 to 25.5 sec (1 step = 100 ms) 4.8 seconds
(48)
---
LIN_OFFHOOK_ALARM 300 047
---
071
Enables or disables the off-hook alarm after finishing fax
communication
The alarm goes off when off-hook condition of the attached phone is
detected after finishing fax communication.
0 = Disable
1 = Enable
Disable
(0)
Not used
LIN_EARTH_TIME 300 048
---
072
Earth time
Earthing time when the outside line connecting method is earth start.
100 to 1000 ms (1 step = 10 ms)
300ms
(30)
---
LIN_FLASH_TIME 300 050
---
073
Flash time
Flashing time when the outside line connecting method is flash start.
100 to 1000 ms (1 step = 10 ms)
320ms
(32)
---
Table 7-18. List of System Parameter (Phone Line)
Label
Maintenance
Code
User
Access
Internal
Address
Description Setting Value Default Remarks
Main Sub

Epson AcuLaser CX11 Specifications

General

Brand	Epson
Model	AcuLaser CX11
Category	All in One Printer
Language	English