Epson AcuLaser CX11 Service Manual

EPSON AcuLaser CX11/CX11F Revision B
APPENDIX Fax Unit System 668
300 115 0x310F
Forced termination of data processing The communication was
interrupted
--- --- Forced stop 50H: Forced stop Transmitting a fax is finished
Receiving a fax is finished
300 200 0x3200
Communication was interrupted The communication was
interrupted
--- --- Forced stop 50H: Forced stop Transmitting a fax is finished
Receiving a fax is finished
300 300 0x3300
The file to be opened does not exist The file was deleted for
some reason
If the error occurs
frequently,
initialize or replace
the fax board
*1, *2 External error code FDH:
Uncategorizable
factors
Fax scanning job is finished
Writing pages is finished
Printing of the received fax is
finished
Reading pages is finished
Printing report is finished
300 301 0x3301
The product attempted to perform Write Open, but
could not get FCB (FCB FULL)
Not used --- --- --- --- ---
300 302 0x3302
Memory full (the memory for storing data is insufficient) Memory full Pre-stored received faxes
are printed out When
sending faxes are stored,
the product waits for the
jobs to be send or delete
the jobs for starting the
latest job.
--- ---
21H: Fax
memory is
insufficient
Fax scanning job is finished
Writing pages is finished
Printing of the received fax is
finished
Reading pages is finished
300 400 0x3400
When transferring data between PRMs, time-out error
occurred before finishing the transferring
Not used
--- --- --- --- ---
300 500 0x3500
The product failed to create a power-off report Not used --- --- --- --- ---
300 501 0x3501
A log file for the communication result could not be made Not used --- --- --- --- ---
300 502 0x3502
The product failed to read time Not used --- --- --- --- ---
300 503 0x3503
When storing a two-page combined transmission data,
the data exceeded 65535 lines for one page
Not used --- --- --- --- ---
300 504 0x3504
When the QM-Coder is in coding process, SC count
over error occurred
Not used --- --- --- --- ---
300 505 0x3505
When the QM-Coder is in decoding process, the end
marker was not detected
Not used --- --- --- --- ---
300 506 0x3506
When printing a received fax stored in the memory, the
product failed to decode the top part of the page for 10
seconds
Not used --- --- --- --- ---
Table 7-23. Operator Call Error
External
error code
Internal
Code
Description Cause Remedies
Panel
Display
(reference)
Report Display
Trigger for
Stopping
Operation
Notification Message
MAIN SUB
manuals4you.commanuals4you.com

Epson AcuLaser CX11 Specifications

General

Brand	Epson
Model	AcuLaser CX11
Category	All in One Printer
Language	English