Huawei Quidway S3900 Series Command Manual

Command Manual - Management VLAN
Quidway S3900 Series Ethernet Switches-Release 1510
Chapter 1 Management VLAN Configuration
Commands
Huawei Technologies Proprietary
1-18
Description
Use the display ip routing-table verbose command to display the detailed
information about a routing table.
This command displays the detailed information about the routing table, in the order of
route state, statistics of the routing table, and the information about each route.
You can use this command to display all the routes, including the inactive and invalid
routes.
Example
# Display the detailed information about the routing table.
<Quidway> display ip routing-table verbose
Routing Tables:
+ = Active Route, - = Last Active, # = Both * = Next hop in use
Destinations: 2 Routes: 2
Holddown: 0 Delete: 0 Hidden: 0
**Destination: 127.0.0.0 Mask: 255.0.0.0
Protocol: #DIRECT Preference: 0
*NextHop: 127.0.0.1 Interface: 127.0.0.1(InLoopBack0)
State: <NoAdvise Int ActiveU Retain Unicast>
Age: 57:12 Cost: 0/0
**Destination: 127.0.0.1 Mask: 255.255.255.255
Protocol: #DIRECT Preference: 0
*NextHop: 127.0.0.1 Interface: 127.0.0.1(InLoopBack0)
State: <NotInstall NoAdvise Int ActiveU Retain Gateway Unicast>
Age: 57:12 Cost: 0/0
The statistics of the routing table are displayed first, and then the detailed descriptions
of each route.
Table 1-5 describes the route states and Table 1-8 describes the
statistics information about the routing table.
Table 1-8 Description on the fields of the display ip routing-table verbose command
Field Description
Holddown Number of the routes that are held down
Delete Number of the deleted routes
Hidden Number of the hidden routes

Huawei Quidway S3900 Series Specifications

General

Brand	Huawei
Model	Quidway S3900 Series
Category	Switch
Language	English