Command Manual – Routing Protocol
Quidway S3900 Series Ethernet Switches-Release 1510 Chapter 3 OSPF Configuration Commands
Huawei Technologies Proprietary
3-26
Router ID Address Pri DeadTime(s) Interface State
2.2.2.2 192.168.0.2 1 39 Vlan-interface 1 Full/BDR
Table 3-11 Description on the fields of the display ospf peer brief command
Field Description
Router ID Router ID of neighbor router
Address
Address of the interface adjacent to the
neighbor router
Pri Priority of neighbor router
DeadTime(s)
Dead time, in seconds, of neighbor
router
Interface
Type and number of the local router
interface connected to the neighbor
router
State
Neighbor router states:
If the neighbor router is a designated
router, its state is displayed as
"state/DR";
If the neighbor router is a backup
designated router, its state is displayed
as "state/BDR".
# Display OSPF peer statistics.
<Quidway> display ospf peer statistics
OSPF Process 1 with Router ID 1.1.1.1
Neighbor Statistics
Area ID Down Attempt Init 2-Way ExStart Exchange Loading Full Total
0.0.0.1 0 0 0 0 0 0 0 1 1
Total 0 0 0 0 0 0 0 1 1
Table 3-12 Description on the fields of the display ospf peer statistics command
Field Description
Area ID Area ID
Down
Initial state for OSPF to establish
neighbor relation, which indicates that
OSPF router does not receive the
message from a certain neighbor router
within a period of time
To Next Page
Loading...
