Agilent Technologies InfiniiVision 3000 X-Series Programmer's Guide

Commands Quick Reference 4
Agilent InfiniiVision 3000 X-Series Oscilloscopes Programmer's Guide 107
:MTESt:AMASk:XDELta
<value> (see
page 498)
:MTESt:AMASk:XDELta?
(see page 498)
<value> ::= X delta value in NR3
format
:MTESt:AMASk:YDELta
<value> (see
page 499)
:MTESt:AMASk:YDELta?
(see page 499)
<value> ::= Y delta value in NR3
format
n/a :MTESt:COUNt:FWAVefor
ms? [CHANnel<n>] (see
page 500)
<failed> ::= number of failed
waveforms in NR1 format
:MTESt:COUNt:RESet
(see page 501)
n/a n/a
n/a :MTESt:COUNt:TIME?
(see page 502)
<time> ::= elapsed seconds in NR3
format
n/a :MTESt:COUNt:WAVeform
s? (see page 503)
<count> ::= number of waveforms
in NR1 format
:MTESt:DATA <mask>
(see page 504)
:MTESt:DATA? (see
page 504)
<mask> ::= data in IEEE 488.2 #
format.
:MTESt:DELete (see
page 505)
n/a n/a
:MTESt:ENABle {{0 |
OFF} | {1 | ON}} (see
page 506)
:MTESt:ENABle? (see
page 506)
{0 | 1}
:MTESt:LOCK {{0 |
OFF} | {1 | ON}} (see
page 507)
:MTESt:LOCK? (see
page 507)
{0 | 1}
:MTESt:RMODe <rmode>
(see page 508)
:MTESt:RMODe? (see
page 508)
<rmode> ::= {FORever | TIME |
SIGMa | WAVeforms}
:MTESt:RMODe:FACTion:
MEASure {{0 | OFF} |
{1 | ON}} (see
page 509)
:MTESt:RMODe:FACTion:
MEASure? (see
page 509)
{0 | 1}
:MTESt:RMODe:FACTion:
PRINt {{0 | OFF} | {1
| ON}} (see page 510)
:MTESt:RMODe:FACTion:
PRINt? (see page 510)
{0 | 1}
:MTESt:RMODe:FACTion:
SAVE {{0 | OFF} | {1
| ON}} (see page 511)
:MTESt:RMODe:FACTion:
SAVE? (see page 511)
{0 | 1}
:MTESt:RMODe:FACTion:
STOP {{0 | OFF} | {1
| ON}} (see page 512)
:MTESt:RMODe:FACTion:
STOP? (see page 512)
{0 | 1}
Table 18 :MTESt Commands Summary (continued)
Command Query Options and Query Returns

Agilent Technologies InfiniiVision 3000 X-Series Specifications

General

Brand	Agilent Technologies
Model	InfiniiVision 3000 X-Series
Category	Test Equipment
Language	English