Agilent Technologies InfiniiVision 3000 X-Series - Serial Decode; Serial Decode Options

Commands Quick Reference 4
Agilent InfiniiVision 3000 X-Series Oscilloscopes Programmer's Guide 125
Table 29 :SBUS<n>:LIN Commands Summary
Command Query Options and Query Returns
:SBUS<n>:LIN:PARity
{{0 | OFF} | {1 |
ON}} (see page 719)
:SBUS<n>:LIN:PARity?
(see page 719)
{0 | 1}
:SBUS<n>:LIN:SAMPlepo
int <value> (see
page 720)
:SBUS<n>:LIN:SAMPlepo
int? (see page 720)
<value> ::= {60 | 62.5 | 68 | 70
| 75 | 80 | 87.5} in NR3 format
:SBUS<n>:LIN:SIGNal:B
AUDrate <baudrate>
(see page 721)
:SBUS<n>:LIN:SIGNal:B
AUDrate? (see
page 721)
<baudrate> ::= integer from 2400
to 625000 in 100 b/s increments
:SBUS<n>:LIN:SOURce
<source> (see
page 722)
:SBUS<n>:LIN:SOURce?
(see page 722)
<source> ::= {CHANnel<n> |
EXTernal} for DSO models
<source> ::= {CHANnel<n> |
DIGital<d>} for MSO models
<n> ::= 1 to (# analog channels)
in NR1 format
<d> ::= 0 to (# digital channels
- 1) in NR1 format
:SBUS<n>:LIN:STANdard
<std> (see page 723)
:SBUS<n>:LIN:STANdard
? (see page 723)
<std> ::= {LIN13 | LIN20}
:SBUS<n>:LIN:SYNCbrea
k <value> (see
page 724)
:SBUS<n>:LIN:SYNCbrea
k? (see page 724)
<value> ::= integer = {11 | 12 |
13}
:SBUS<n>:LIN:TRIGger
<condition> (see
page 725)
:SBUS<n>:LIN:TRIGger?
(see page 725)
<condition> ::= {SYNCbreak | ID |
DATA}
:SBUS<n>:LIN:TRIGger:
ID <value> (see
page 726)
:SBUS<n>:LIN:TRIGger:
ID? (see page 726)
<value> ::= 7-bit integer in
decimal, <nondecimal>, or
<string> from 0-63 or 0x00-0x3f
<nondecimal> ::= #Hnn where n ::=
{0,..,9 | A,..,F} for hexadecimal
<nondecimal> ::= #Bnn...n where n
::= {0 | 1} for binary
<string> ::= "0xnn" where n ::=
{0,..,9 | A,..,F} for hexadecimal