Agilent Technologies InfiniiVision 3000 X-Series - Define a New Label

Commands Quick Reference 4
Agilent InfiniiVision 3000 X-Series Oscilloscopes Programmer's Guide 139
:SYSTem:PRESet (see
page 858)
n/a See :SYSTem:PRESet (see
page 858)
:SYSTem:PROTection:LO
CK <value> (see
page 861)
:SYSTem:PROTection:LO
CK? (see page 861)
<value> ::= {{1 | ON} | {0 |
OFF}}
:SYSTem:SETup
<setup_data> (see
page 862)
:SYSTem:SETup? (see
page 862)
<setup_data> ::= data in IEEE
488.2 # format.
:SYSTem:TIME <time>
(see page 864)
:SYSTem:TIME? (see
page 864)
<time> ::= hours,minutes,seconds
in NR1 format
Table 47 :SYSTem Commands Summary (continued)
Command Query Options and Query Returns
Table 48 :TIMebase Commands Summary
Command Query Options and Query Returns
:TIMebase:MODE
<value> (see
page 867)
:TIMebase:MODE? (see
page 867)
<value> ::= {MAIN | WINDow | XY |
ROLL}
:TIMebase:POSition
<pos> (see page 868)
:TIMebase:POSition?
(see page 868)
<pos> ::= time from the trigger
event to the display reference
point in NR3 format
:TIMebase:RANGe
<range_value> (see
page 869)
:TIMebase:RANGe? (see
page 869)
<range_value> ::= time for 10 div
in seconds in NR3 format
:TIMebase:REFerence
{LEFT | CENTer |
RIGHt} (see page 870)
:TIMebase:REFerence?
(see page 870)
<return_value> ::= {LEFT | CENTer
| RIGHt}
:TIMebase:SCALe
<scale_value> (see
page 871)
:TIMebase:SCALe? (see
page 871)
<scale_value> ::= time/div in
seconds in NR3 format
:TIMebase:VERNier {{0
| OFF} | {1 | ON}}
(see page 872)
:TIMebase:VERNier?
(see page 872)
{0 | 1}
:TIMebase:WINDow:POSi
tion <pos> (see
page 873)
:TIMebase:WINDow:POSi
tion? (see page 873)
<pos> ::= time from the trigger
event to the zoomed view
reference point in NR3 format