Agilent Technologies InfiniiVision 3000 X-Series Programmer's Guide

84 Agilent InfiniiVision 3000 X-Series Oscilloscopes Programmer's Guide
4 Commands Quick Reference
Table 6 :CALibrate Commands Summary
Command Query Options and Query Returns
n/a :CALibrate:DATE? (see
page 253)
<return value> ::=
<year>,<month>,<day>; all in NR1
format
:CALibrate:LABel
<string> (see
page 254)
:CALibrate:LABel?
(see page 254)
<string> ::= quoted ASCII string
up to 32 characters
:CALibrate:OUTPut
<signal> (see
page 255)
:CALibrate:OUTPut?
(see page 255)
<signal> ::= {TRIGgers | MASK |
WAVEgen}
n/a :CALibrate:PROTected?
(see page 256)
{PROTected | UNPRotected}
:CALibrate:STARt (see
page 257)
n/a n/a
n/a :CALibrate:STATus?
(see page 258)
<return value> ::=
<status_code>,<status_string>
<status_code> ::= an integer
status code
<status_string> ::= an ASCII
status string
n/a :CALibrate:TEMPeratur
e? (see page 259)
<return value> ::= degrees C
delta since last cal in NR3
format
n/a :CALibrate:TIME? (see
page 260)
<return value> ::=
<hours>,<minutes>,<seconds>; all
in NR1 format
Table 7 :CHANnel<n> Commands Summary
Command Query Options and Query Returns
:CHANnel<n>:BWLimit
{{0 | OFF} | {1 |
ON}} (see page 264)
:CHANnel<n>:BWLimit?
(see page 264)
{0 | 1}
<n> ::= 1 to (# analog channels)
in NR1 format
:CHANnel<n>:COUPling
<coupling> (see
page 265)
:CHANnel<n>:COUPling?
(see page 265)
<coupling> ::= {AC | DC}
<n> ::= 1 to (# analog channels)
in NR1 format
:CHANnel<n>:DISPlay
{{0 | OFF} | {1 |
ON}} (see page 266)
:CHANnel<n>:DISPlay?
(see page 266)
{0 | 1}
<n> ::= 1 to (# analog channels)
in NR1 format

Agilent Technologies InfiniiVision 3000 X-Series Specifications

General

Brand	Agilent Technologies
Model	InfiniiVision 3000 X-Series
Category	Test Equipment
Language	English