Agilent Technologies InfiniiVision 3000 X-Series - Page 92

92 Agilent InfiniiVision 3000 X-Series Oscilloscopes Programmer's Guide
4 Commands Quick Reference
:FUNCtion:SOURce1
<source> (see
page 352)
:FUNCtion:SOURce1?
(see page 352)
<source> ::= {CHANnel<n> | GOFT |
BUS<m>}
<n> ::= {1 | 2 | 3 | 4} for 4ch
models
<n> ::= {1 | 2} for 2ch models
<m> ::= {1 | 2}
GOFT is only for FFT, INTegrate,
DIFF, and SQRT operations.
:FUNCtion:SOURce2
<source> (see
page 354)
:FUNCtion:SOURce2?
(see page 354)
<source> ::= {CHANnel<n> | NONE}
<n> ::= {{1 | 2} | {3 | 4}} for
4ch models, depending on SOURce1
selection
<n> ::= {1 | 2} for 2ch models
:FUNCtion:TRENd:MEASu
rement <type> (see
page 355)
:FUNCtion:TRENd:MEASu
rement? (see
page 355)
<type> ::= {VAVerage | ACRMs |
VRATio | PERiod | FREQuency |
PWIDth | NWIDth | DUTYcycle |
RISetime | FALLtime}
Table 13 :FUNCtion Commands Summary (continued)
Command Query Options and Query Returns
Table 14 :HARDcopy Commands Summary
Command Query Options and Query Returns
:HARDcopy:AREA <area>
(see page 359)
:HARDcopy:AREA? (see
page 359)
<area> ::= SCReen
:HARDcopy:APRinter
<active_printer> (see
page 360)
:HARDcopy:APRinter?
(see page 360)
<active_printer> ::= {<index> |
<name>}
<index> ::= integer index of
printer in list
<name> ::= name of printer in
list
:HARDcopy:FACTors {{0
| OFF} | {1 | ON}}
(see page 361)
:HARDcopy:FACTors?
(see page 361)
{0 | 1}
:HARDcopy:FFEed {{0 |
OFF} | {1 | ON}} (see
page 362)
:HARDcopy:FFEed? (see
page 362)
{0 | 1}
:HARDcopy:INKSaver
{{0 | OFF} | {1 |
ON}} (see page 363)
:HARDcopy:INKSaver?
(see page 363)
{0 | 1}
:HARDcopy:LAYout
<layout> (see
page 364)
:HARDcopy:LAYout?
(see page 364)
<layout> ::= {LANDscape |
PORTrait}