Agilent Technologies InfiniiVision 3000 X-Series - Page 94

94 Agilent InfiniiVision 3000 X-Series Oscilloscopes Programmer's Guide
4 Commands Quick Reference
:LISTer:DISPlay {{OFF
| 0} | {SBUS1 | ON |
1} | {SBUS2 | 2} |
ALL} (see page 377)
:LISTer:DISPlay? (see
page 377)
{OFF | SBUS1 | SBUS2 | ALL}
:LISTer:REFerence
<time_ref> (see
page 378)
:LISTer:REFerence?
(see page 378)
<time_ref> ::= {TRIGger |
PREVious}
Table 15 :LISTer Commands Summary (continued)
Command Query Options and Query Returns
Table 16 :MARKer Commands Summary
Command Query Options and Query Returns
:MARKer:MODE <mode>
(see page 381)
:MARKer:MODE? (see
page 381)
<mode> ::= {OFF | MEASurement |
MANual | WAVeform}
:MARKer:X1Position
<position>[suffix]
(see page 382)
:MARKer:X1Position?
(see page 382)
<position> ::= X1 cursor position
value in NR3 format
[suffix] ::= {s | ms | us | ns |
ps | Hz | kHz | MHz}
<return_value> ::= X1 cursor
position value in NR3 format
:MARKer:X1Y1source
<source> (see
page 383)
:MARKer:X1Y1source?
(see page 383)
<source> ::= {CHANnel<n> |
FUNCtion | MATH | WMEMory<r>}
<n> ::= 1 to (# analog channels)
in NR1 format
<r> ::= 1-2 in NR1 format
<return_value> ::= <source>
:MARKer:X2Position
<position>[suffix]
(see page 384)
:MARKer:X2Position?
(see page 384)
<position> ::= X2 cursor position
value in NR3 format
[suffix] ::= {s | ms | us | ns |
ps | Hz | kHz | MHz}
<return_value> ::= X2 cursor
position value in NR3 format
:MARKer:X2Y2source
<source> (see
page 385)
:MARKer:X2Y2source?
(see page 385)
<source> ::= {CHANnel<n> |
FUNCtion | MATH | WMEMory<r>}
<n> ::= 1 to (# analog channels)
in NR1 format
<r> ::= 1-2 in NR1 format
<return_value> ::= <source>
n/a :MARKer:XDELta? (see
page 386)
<return_value> ::= X cursors
delta value in NR3 format
:MARKer:XUNits <mode>
(see page 387)
:MARKer:XUNits? (see
page 387)
<units> ::= {SEConds | HERTz |
DEGRees | PERCent}