ETC Cobalt 10 - Connector - Phone Remote; Connector - MIDI

Cobalt 8.1 - 20181029
1005
Connector - Phone Remote
Pin 4 Data+
Pin 5 Data -
The Remote Control Setting must be turned on for the remote to work. See Settings - System
.
Connector - MIDI
MIDI in/out (MIDI timecode, MIDI notes, MIDI Show Control (MSC). (MIDI timecode, MIDI Show
Control through Net3 Gateway, SMPTE timecode through Net3 Gateway).
MIDI In
Pin 4 Data +
Pin 5 Data -
MIDI Out, Thru
Pin 2 Gnd
Pin 4 Data +
Pin 5 Data -