Cobalt 8.1 - 20181029
278
Device Settings - Patching
It is possible to Patch devices directly into the Device Settings tab. You can use any channel selection
to patch fast.
Function Key Feedback
Insert a new
Device
[#] [INSERT]
A new Device is inserted.
Delete the selected
Device
[DELETE]
The selected Device is deleted. You
can only delete one device at a time.
Insert the current
channel selection
as devices
[INSERT]
The current channel selection is
inserted as Devices.
Change template
for multiple
devices
[SELECT]
Use SELECT to select multiple
cells. Select a new template from
the dropdown and press MODIFY *
Change address for
multiple devices
[SELECT]
Use SELECT to select multiple
cells. Enter a start address and press
MODIFY.
Unpatch a device
[0] [MODIFY]
In the Adress cell you can unpatch
the currently selected devices by
entering 0.
*If a template isn't available, use the Import Template Wizard to import it. See Import Template
Wizard.
NOTE
When you patch a template with multiple parts, separate devices will be
created for the various parts and decimal channel numbers will be assigned.
Changing the start address of the base channel will update the sub devices
accordingly.
To Next Page
Loading...
