Cobalt 8.1 - 20181029
391
Sequences - Insert Step
There are two ways of inserting a sequence step between two existing ones.
• Record a preset with a (decimal) number that fits between
• Insert any preset in the Sequence List (See Sequence List
)
Insert A Sequence Step - In any playback
When you are working directly in a Playback and record a new preset, it is inserted numerically into
the sequence of that Playback.
Function Shortcut Feedback
Insert Step
[1] [.] [5]
[RECORD]
Inserts between 1 and 2. A
popup will ask you to
confirm recording.
Confirm
[RECORD]
The preset is recorded
between 1 and 2.
Insert A Sequence Step Directly In The Main Playback
You can insert a preset into the sequence of the main playback directly. This is not available with Cue
Sequences.
Function Shortcut Feedback
Insert before A
[#] [INSERT] & [A]
Preset # is inserted before the
current step in A
Insert before B
[#] [INSERT] & [B]
Preset # is inserted before the
current step in B
Insert A Sequence Step - In The List
Function Shortcut Feedback
1. Open the Sequence list
[#] [SEQ]
The List for sequence # is
opened.
2. Move to the step you
wish to insert a new step
after
Arrow Keys The selected step is
highlighted in yellow.
3. Insert Preset #
[#] [INSERT]
The preset is inserted after
the selected step
To Next Page
Loading...
