Cobalt 8.1 - 20181029
369
Sequences - In The Main Playback
When you open a new play there is a default sequence (1) in the Main Playback.
When you record a Preset or Cue in the Live field it will be added to the sequence in the Main
playback.
These are the sequence functions for the Main Playback
Function Key Feedback
Record a new step
[#] [RECORD]
Each time a Preset
or Cue is recorded in Live
it is added as a new step to
the sequence loaded to the
Main Playback*
Edit step
[MODIFY] &
[PLAYBACK]
Opens the Sequence List
for the sequence in the
Main Playback. See
Sequences - Sequence List.
Navigate See Main Playback.
*Unless the mode Build Sequence is off. See Settings - Crossfade.
To Next Page
Loading...
