ETC Cobalt 10 - Console Key - TAP; Console Key - TEXT; Console Key - THRU

Cobalt 8.1 - 20181029
924
• [TAB] & [down arrow] - Split the screen vertically, press again to split horizontally. Hold
TAB and press the up arrow to exit the split.
• [TAB] & [right/left arrow] - Move the selected tab to the next screen.
• [TAB] & [level wheel] - Resize the lower part of a spreadsheet view.
• [SETUP] & [TAB] - Open a dialogue to park a tab so it can't be closed with ESC.
• [C/Alt] & [TAB] - Reset all Tabs to default (Live and Playback).
For more information see Navigating - Tabs
.
Keyboard equivalent: [TAB]
Console Key - TAP
The TAP key is used to set a tempo to an effect.
• [TAP] & [master key] [master key] - Hold [TAP] and press a [master key] twice to set a
tempo to a chase in that master.
For more information see Master Playback - Playback Keys
.
There is no keyboard equivalent
Console Key - TEXT
The TEXT key is used to set text labels to items.
• [TEXT] - Open the text input for the sequence step in the A field of the main playback.
• [TEXT] & [master key] - Activate text input for the content for that master playback.
• [TEXT] & [direct select key] - Activate text input for the content for that direct select key.
For more information see Entering Texts
.
Keyboard equivalent: [ALT] & [T]
Console Key - THRU
The THRU key is used to select a range of channels, and in combination with other keys for additional
channel functions.
• [#] [CHANNEL] [#] [THRU] - Select all channels between # and #.
NOTE
If you are operating in At Mode the syntax is "ch number - THRU - ch number".
For more information see Select Channels
.